Analysis of the classification and maintenance considerations of air shower purification equipment

I. Classification of air shower room purification equipment

1. Color steel plate air shower room: this one is suitable for a dry environment and the number of staff is not much, so the price is relatively low.

2. Cold-rolled steel plate air shower room: generally applicable to electronic factories, and the number of people is more occasions, the material is mainly stainless steel, very durable, and the price is relatively moderate.

3. Stainless steel plate air shower room: these can also be divided into SUS201 and SUS304 two kinds, suitable for food processing, medicine, health care and so on the processing industry, even in the face of a more humid environment will not rust.

II. Maintenance of air shower room purification equipment

1. The air shower room equipment in an enterprise should be managed by special personnel, and the primary filter material should be replaced regularly every quarter.

2. Every two years or so replace the high-efficiency filter material.

3. When using the air shower room, we should pay attention to the inner and outer doors of the air shower room that need to be lightly closed and lightly opened.

4. If the air shower room failure should be reported to the professional maintenance personnel for repair, in general, can not start the manual button at will.

III. Parameters of the air shower room purification equipment

1. External dimensions: 1240×2000×2050 (width×depth×height).

2. Purification efficiency: ≥0.5um dust ≥99.99% (sodium flame method).

3. Nozzle wind speed: ≥27m/s or more.

4. Air shower time: 0--99sec.

5. Circulating air volume: 1600--2000M3/h.

6. Size of the high-efficiency filter with partition: 610×610×120.

7. Primary filter size: 600×300×21.