Bench principle and selection of air shower rooms

I. Working principle of air shower room: 

The air shower room will be air filtered and purified through a high-efficiency filter and blown out from the top or both sides through a high-speed airflow to achieve the purpose of removing microscopic dust, bacteria, and other pollutants. Its working principle mainly includes the following elements:

1. High-speed airflow: air shower room through high-speed airflow pollutants quickly discharged from the clean area, to prevent them from entering the clean environment, The general wind shower room wind speed is 25m/s.

2. High-efficiency filter: The air shower room through the high-efficiency filter filters air particles bacteria and other pollutants, to ensure that the discharged airflow is clean.

3. Primary filter: The bottom side of the air shower room is usually set up on the side of the return air plate built-in primary filter, will be blown down the particles for adsorption and filtration.


II. Selection of air shower room


1. Provide high-speed clean air: The air shower room adopts a high-quality aluminum frame without partition low-resistance high-efficiency filters, higher filtration efficiency (99.99%0.3um), wind speed of more than 25m/s or more, and a use of double-layer steel static pressure box design, high static pressure fan blowing shower without deformation and leakage.

2. Intelligent control: The air shower room can be equipped with an optional 7-inch capacitive touch integrated LCD screen; the air shower room can be started and stopped, wind speed adjustment and blowing time adjustment; also through the sensor on the temperature and humidity, positive pressure, wind speed, cleanliness and other real-time monitoring, but also can be fault self-test.