Clean bench installation steps

The main function of the clean bench is to provide a sterile, dust-free, and microorganism-free working environment. The quality of the installation directly determines the purification effect of the clean bench during use. The specific installation points are as follows:
1. Preparation before installation
(1) First, choose a suitable installation location. Try to install it indoors. It is best to install it in a place with good ventilation, sufficient light, and suitable temperature, away from dust sources, and not easy to vibrate, so as not to affect the work effect;
(2) Secondly, check whether the accessories and parts of the workbench are complete, including filters, fans, electrical control boxes, etc.;
(3) Finally, configure a complete set of installation tools, such as wrenches, screwdrivers, electric drills, etc.
2. Determine the installation location
Before installing the clean bench, you need to determine the installation location. Choose a suitable load-bearing ground according to the size and weight of the workbench. In general, the clean bench needs to be installed on a flat ground and leave a certain amount of space for easy maintenance.
3. Install the base
The clean bench requires a stable support structure. Place the base at the installation location and fix it with screws. After the base is fixed, you need to check the levelness and stability of the base to ensure that the clean bench does not shake or tilt.
4. Install filters and fans
Installing filters and fans is a key step in installing a clean bench. First, the filter needs to be installed in the filter slot, and then the fan is installed on the fan base. The installation of filters and fans should be carried out according to the requirements of the instructions to ensure correct connection and fixation.
5. Install the workbench
Place the workbench on the base and fix it with screws. When fixing the workbench, pay attention to the level and stability of the workbench to ensure that the workbench does not shake or tilt.
6. Connect the power supply
Connect the power cord of the workbench to the electric control box, and then fix the electric control box in a suitable position. When connecting the power supply, it is necessary to follow the relevant safety regulations and operating procedures and pay attention to the polarity of the power cord and the correctness of the wiring to ensure the safety and reliability of the connection.
7. Install other accessories
Other accessories, such as lighting and power sockets, can be installed as needed. When installing other accessories, it is necessary to follow the instructions to ensure correct connection and fixation.
8. Debugging and acceptance
Finally, debug and accept the equipment. After the installation is completed, the equipment needs to be debugged and accepted to ensure the normal operation of various functions of the clean bench. During the commissioning and acceptance process, attention should be paid to safety and hygiene. Ultra-clean vacuum cleaners or tools that do not generate fibers must be used to carefully clean the inside of the equipment and its surroundings, and relevant operating procedures and standards must be followed. The above are the installation steps and details of the clean bench. Before installing the clean bench, you should carefully understand its installation process and install it according to the process. Only by strictly abiding by relevant specifications and operating procedures can the normal operation of the clean bench and the reliability of the working effect be guaranteed.