Fast-rolling shutter shower maintenance cycle

1. Daily maintenance
Clean appearance
The curtain surface and door frame of the shower room should be simply cleaned every day. Because in the daily use process, impurities such as dust and cargo residue are easy to adhere to the door body. Wipe the curtain and door frame with a clean soft cloth to remove these debris in time and keep the appearance clean.
At the same time, the cleaning process can also check whether the curtain is damaged, torn, or derailed and whether the connection part of the door frame is loose.
Functional check
Every day before and after use, it is necessary to check the basic function of the fast shutter shower room. It mainly includes testing whether the door is opened and closed smoothly by manual or automatic operation.
Check that sensing devices such as infrared sensing and geomagnetic sensing (if any) are working properly. You can observe whether the door can be opened and closed in time by simulating the approach of a person or a vehicle. In addition, it is also necessary to check whether safety devices, such as airbags, emergency stop buttons, etc. can work properly.
Two, weekly maintenance
Track cleaning
The track of the fast-rolling shutter door is the key part to ensure the smooth operation of the door. Because the track is easy to accumulate dust, small particles, and other debris, you should use a special brush or small vacuum cleaner to clean the track every week.
After cleaning, it is also necessary to apply a small amount of lubricant on the track to reduce the friction of the door during operation. However, it should be noted that the amount of lubricant should not be too much to avoid dripping on other parts.
Check nozzle and air nozzle.
The nozzle and air nozzle in the cargo shower room need to be checked once a week. Check whether the nozzle is blocked and whether there is foreign matter in the nozzle. Its function can be checked with a simple water or ventilation test.
If it is found that the nozzle is blocked, you can use a fine needle to gently dredge, and the air nozzle can be blown with compressed air to remove foreign bodies. At the same time, check the fixing of the nozzle and air nozzle to ensure that they are firmly installed.
Three, monthly maintenance
Motor inspection
The motor is the power source of the fast-rolling shutter door. It is necessary to check the motor once a month, mainly including checking the appearance of the motor to see if there are signs of overheating discoloration, and burning.
At the same time, listen to the sound of the motor in the operation process, under normal circumstances should be a smooth running sound, if there is abnormal noise, such as friction, buzz, etc., may indicate that there is a problem with the motor. Also, check whether the cooling fan of the motor is working properly and whether the connection line of the motor is loose.
Control system inspection
Check the control system of the cargo shower room monthly, including the buttons and indicators on the control panel. Check whether the button is sensitive and whether the indicator can correctly display the status of the door, such as open, closed, faulty, etc.
Also check whether the circuit board of the control system is damp, dust accumulation, and so on. If you find dust on the circuit board, you can use a compressed air tank to gently blow it off, but avoid direct contact with the circuit board to prevent electrostatic damage.
Fourth, quarterly maintenance
Deep curtain maintenance
The cord fabric needs to be deeply serviced once a quarter. In addition to daily cleaning, professional cleaners can be used to clean the fabric and remove stubborn stains.
At the same time, check the flexibility and elasticity of the cord, because long-term use may cause the cord to harden and become brittle. If the quality of the cord is found to be declining, you can consider replacing the cord or taking protective measures, such as applying protective agents.
Full inspection of mechanical parts
Perform a thorough inspection of the mechanical components of the fast-rolling door, such as reels, bearings, chains (if any), etc. Check whether the scroll is deformed, whether the lubrication of the bearing is good and whether the tension degree of the chain is appropriate.
For parts that need to be adjusted, such as chain tension, appropriate adjustments can be made according to the instruction manual. In addition, all mechanical parts of the connection points for tightening inspection to prevent loosening.
5. Annual maintenance
Comprehensive performance test
It is necessary to conduct a comprehensive performance test of the fast shutter door shower room every year. Including the opening and closing speed test of the door, according to the product standard, the opening speed of the fast shutter door is generally between 0.6-2 meters per second, and the closing speed should also be within a reasonable range.
Test the sensing range and accuracy of the induction device to ensure that it meets the original design requirements. At the same time, a comprehensive test of the safety device, such as the trigger pressure test of the airbag, the response time test of the emergency stop system, etc.
Parts replacement and updating
According to the results of inspection and testing, replace the badly worn or damaged parts, such as motors, curtains, induction devices, etc. At the same time, the software of the control system (if updated) is updated to improve the stability and performance of the system.
In addition, the overall structure of the cargo shower room is checked to see if there are deformation, corrosion, and other situations due to long-term use, and timely repair measures are taken.