Introduction to the performance of primary filters

I. Product characteristics

The non-woven filter is designed with a progressively denser structure, which allows you to choose layers of different densities depending on the size of the dust, allowing you to hold more dust within a certain range and operate with low resistance, making it a depth-based filtration method.
In addition, this unit has very high permeability and low-pressure loss.

The raw materials used in this product are composite fibers with different melting points inside and outside, the joints between the fibers are very strong, tightly bonded, and not easy to fall off; they can be repeatedly cleaned and used; and they do not contain silicon, which is safe and non-toxic; no chemicals are added in the production of the product, and it is not flammable in case of fire.

II. Selection of the outer frame of the product

1、Generally you can choose a waterproof paper frame, the cost of use is relatively low;

2、There is also a galvanized iron frame or aluminum frame, which has a long service life.

III, the use of products

1、Generally used in the air system inlet at the priority channel filtration and air conditioning system return air filtration;

2、Applicable to various industrial products, such as pollution prevention, air conditioning, electronics industry, food industry, etc;

3、Can be used in front of medium-performance filtration equipment;

4, industrial waste gas, processing pollution generated by the exhaust gas treatment;

5, there are also precision instruments, metallurgy, chemical industry, printing, environmental protection industry, and so on different fields.