Knife-edge high-efficiency filter

Knife-frame high-efficiency filters and knife-edge high-efficiency filters are suitable for places such as pharmaceutical factories, biological factories, food processing, and other areas that need to strictly control air pollution sources and terminal filtration of various clean workshops with vertical air supply. Knife-frame high-efficiency filter | Knife-edge high-efficiency filter introduction: 1. The aluminum profile frame is directly equipped with a 40mm deep side-measured curtain-type knife frame structure, which can be directly inserted into the liquid tank sealing device to ensure high sealing, easy installation, and good sealing performance. Knife-frame high-efficiency filters and knife-edge high-efficiency filters are the same high-efficiency filters. The aluminum profile frame is directly equipped with a 40mm deep side-measured curtain-type knife frame structure, which can be directly inserted into the liquid tank sealing device to ensure high sealing, easy installation, good sealing performance, high efficiency, low resistance, large dust holding capacity, good wind speed uniformity, and other characteristics.
Knife-frame high-efficiency filter | Knife-edge high-efficiency filter product features: 1. The air outlet surface has a knife edge of a certain length. 2. Made of glass fiber filter paper, separated by hot melt adhesive. 3. The pleat spacing is equal to ensure the best airflow and achieve high dust holding capacity. 4. Special sealant seals to ensure tightness. 5. Plastic spray guardrails are installed at the inlet and outlet of the filter to reduce filter paper damage.
Knife-type high-efficiency filter | Knife-edge high-efficiency filter operating conditions: 1. Filter material: H13-H14 domestic high-humidity resistant glass fiber filter paper or H13-H14 American HV glass fiber filter paper. 2. Frame sealant: polyurethane glue, hot melt glue. 3. Frame material: aluminum profile frame. 4. The partition is hot melt glue. 5. Optional thickness of aluminum profile: 90mm, 110mm, 120mm 6. Filtration efficiency: H13: 99.97-99.99%@0.3μm H14: 99.995-99.999%@0.3μm. 7. The maximum operating temperature is 70℃ and the maximum operating humidity is 80℃.
Knife-type high-efficiency filter | What are the design features of knife-edge high-efficiency filter?
1. This high-efficiency filter is mainly used to filter tiny airborne particles in the air when designed, so it can be used as the end filter of various filtration systems. It can filter out tiny suspended particles in the air, which can bring great freshness to the air so that everyone can use it with more confidence.
2. The filter material of this high-efficiency filter is made of ultra-fine glass fiber filter paper separated by hot melt adhesive. Ultra-fine glass fiber filter paper is very heat-resistant and flame-retardant, and its dirt-holding capacity is also large. It can effectively filter various gases and oils. The knife-type high-efficiency filter uses it as the filter material. The high-performance filter material can make the filter work better.
3. The technology used in this high-efficiency filter allows better airflow to pass through and can achieve high dust-holding capacity. The high-efficiency filter material of the filter can use this design to reduce its operating cost to a certain extent, and it will also reduce the operating cost of the entire machine. Make the filter more cost-effective and make the filter system more efficient.
4. This high-efficiency filter is sealed with a special sealant around it to ensure the tightness of the filter and also to ensure that the filter does not leak. This can ensure the high-efficiency operation of the enterprise to a large extent.
5. This high-efficiency filter is equipped with a spray-coated protective net on its inlet and outlet surfaces, which can protect the filter paper from damage to a large extent, extend the service life of the filter, and also reduce the maintenance cost of the filter, which can be said to kill two birds with one stone.
6. This high-efficiency filter is suitable for terminal filtration of clean workshops with various vertical air supplies. It has very high efficiency, low resistance, and a large dust-holding capacity. The key is that this filter is very convenient to install, without overly complicated installation steps, and is much easier to install.