Knowledge about air showers

I. Material of the air shower room

Now we commonly use the air shower room equipment is a 1.0mm thick cold-rolled steel plate and supporting material system made of the surface using an electrostatic spraying process, so the overall characteristics of the beautiful, durable; internal walls, doors, and other stainless steel materials, the effect is more obvious.

II. The characteristics of the air shower room

1. With all stainless steel, multi-angle, adjustable nozzle, large air volume, and low noise fan, the wind speed of the air outlet can reach more than 25m/s.

2. Humanized operation method, intelligent control panel design, can indicate the time and state of the blowing shower, and the blowing shower time is adjustable within 10--99s.

3. High cleanliness, and high airspeed, the equipment is made of materials imported from the United States, and the filtration efficiency can reach 99.99%, to ensure the level of purification.

III. Structure of the air shower room

The whole system of the air shower room adopts PLC intelligent control method, and the control panel has an LED display to show the state of the air shower, the state of the double doors, the cycle of the air shower, and so on. There is also a special photoelectric sensor, if people enter from a non-clean area, after closing the door, infrared light will induct the automatic blowing shower.

IV. Steps of using the air shower room

1. Personnel enter the air shower room through the entrance door and close the door, then the photoelectric sensor will sense the presence of people and start blowing.

2. When the time of blowing shower reaches the set time, it will automatically stop, and only then the door can be opened.

3. When the personnel from the exit door into the air shower room, close the door after the work can be carried out.

4. When the personnel enters and exits should develop good habits, and close the door with their hands, so as not to cause another door lock on the phenomenon of not being able to open.

V. Instructions for use of the air shower room

1. The newly installed air shower room should be thoroughly cleaned before use.

2. The time of the air shower can usually be set to 15S is more appropriate.

3. The control board of the air shower is installed with an emergency stop button, so if you encounter special circumstances in the process, you can urgently end the air shower and leave the air shower room in time.

4. The door of the air shower will have a red light indication if it is not closed properly.